How to change your gas assisted lift on an Innova

How to change your gas assisted lift on an Innova

This is a very quick and easy process, just like most tasks on an Innova machine.
Our technician, Noah, will show you how you can do this process with just a flat blade screwdriver and a 1/2 inch hex wrench.
It's always best to order two assemblies and have them on hand when needed. Here is a link to the gas spring assembly in our store.





    • Related Articles

    • Moving your Innova machine

      MOVING YOUR INNOVA   1)      Wrap leaders with plastic wrap to protect them. 2)      Remove top leader bar by removing OUTSIDE collar on right side of roller end plate. Do not loosen or move inside gear collar as that will mess up centers. (2 mm hex ...

    • Machine sensitivity, and how can I change it?

      MACHINE SENSITIVITY The sensitivity on Innova machines can be adjusted from 1 to 10 in the setup settings of the machine. The higher number the sensitivity is set to the more “responsive” the machine will be to speed changes. Michael from ABM has ...

    • What is a Sew Zone for Innova Computerized Longarm Machines?

      WHAT IS A SEW ZONE? Why do I need one? How do I make one? What do I do if it does not work?  Innova Longarm Robotics -- Navigator, AutoPilot (pre-Mach 3 generation) and Mach3 AutoPilot  For Innova Longarm Robotics a Sew Zone is a “safe area” for the ...

    • What Threads Can I use on an Innova Longarm Quilting Machine?

      What kind of thread can I use on an Innova Longarm?  ​ This is a question we get often when people are considering an Innova longarm.  People often have this question because they have heard from some longarmers that their machine only likes a ...

    • How many yards of thread are there on my Red Innova Vortex bobbin?

      HOW MANY YARDS OF THREAD ARE ON MY RED INNOVA VORTEX BOBBIN?   The number of yards on a bobbin can be estimated/calculated by a thread manufacturer. This information is sometimes found on their website based on the standard sizes of bobbins L and M ...